Skip to content
We Answer 24/7 $0 Trip Fee. Always.

How long does an HVAC replacement take?

Tips & Advice

Founder, U.S. Army veteran

October 30, 2026
5 min read
How long does an HVAC replacement take?

Most furnace, AC and heat pump replacements take 1 to 3 days once work starts. What can add time, how to prepare and what happens if you can't wait.

Most HVAC replacements take 1 to 3 days once work starts, depending on the system. Where a job falls in that range depends on what your home needs, such as duct or electrical changes.

Knowing the timeline helps you plan around work, school and the weather. This guide covers what shapes the length of an install, how to get your home ready and what happens if your system has already quit. For the full service, see our furnace and AC replacement page.

How long does an HVAC replacement take once work starts?

Most installs take 1 to 3 days once work starts. That covers furnace, AC, heat pump and full system replacements, as well as ductless mini-split installs.

The range is wide on purpose. Every home is different, and the same equipment can go into two houses in very different ways. One home may have open access and ducts that fit the new system. Another may need changes before the new equipment can run as rated.

Your written quote is the place to see what your job includes. When you know the scope, you know what is behind the timeline.

For a ductless project, our guide to how long a mini-split installation takes covers that system type in more detail.

What can add time to an install?

Work beyond swapping the equipment. Changing system type, replacing ductwork, upgrading the electrical panel and moving equipment to a new spot all add scope, and more scope means more time within the job.

  • Changing system type. Going from a furnace and AC to a heat pump, or to dual fuel, involves different equipment and connections than a like-for-like swap.
  • Ductwork. If the existing ducts are too small or in poor shape for the new system, some may need to be replaced. Our guide to whether your existing ducts can work with a heat pump explains how that is judged.
  • Electrical work. Some heat pumps need more electrical capacity. A panel upgrade or a new circuit is separate electrical work done by our master electrician.
  • Gas, venting and drains. A new high-efficiency furnace may need new venting and a condensate drain.
  • Moving the equipment. Putting the new system somewhere other than where the old one sat changes what has to be connected.
  • Access. A tight attic, a small closet or a crawl space takes longer to work in than an open basement.
  • Replacing both units. Doing the furnace and AC together is one project, but it is more work than replacing one.

If you are deciding between one unit and two, our guide on replacing your furnace and AC at the same time weighs the trade-offs. Our look behind the scenes of complex HVAC upgrades shows how bigger projects come together.

What if you can't install the same day?

If we can't install the same day your system fails, we'll loan you a portable AC or space heater until we can, free.

When a system quits in a heat wave or a cold snap, it is the hardest time to make a big decision. A temporary unit takes some of the pressure off, so you can compare options and choose the right system instead of the fastest one.

If your system has failed and it is an emergency, call us. We answer 24/7, with no after-hours charges, ever. If it's a real emergency, we escalate to a manager right away and move our schedule to get you help. Everything else goes on the schedule starting at 7am.

How can I get my home ready for install day?

Clear a path to the equipment, make room around the indoor and outdoor units and plan for pets and parking. Small steps like these help the work go smoothly.

  • Clear the path. Move furniture, rugs and boxes from the route between the door and the furnace, air handler or attic access.
  • Make room around the equipment. Give space around the indoor unit and the outdoor unit so the crew can work safely.
  • Plan for pets. Doors will open and close often. Keep pets in a closed room or away from the work area.
  • Think about parking. Leave space in the driveway or on the street near the house if you can.
  • Know your thermostat. If you are getting a new thermostat, ask how it works before the crew leaves.

The old equipment is removed and disposed of as part of the replacement, so you do not need to plan for that.

When does my coverage start?

Every new system we install is covered by the Veteran 1-Year Make-It-Right-or-Take-It-Back Guarantee for 12 months from start-up, the day we commission it. Conditions apply; the written guarantee is available before you buy. Read the guarantee.

Our work carries a lifetime warranty against defects in materials and workmanship, for the original homeowner. If the home is sold, coverage becomes 10 years parts and labor from the installation date. Read the full warranty terms.

How do I get on the schedule?

Call or book a $0 visit. We look at your home, give you a written quote and then put the install on the schedule. Scheduled work starts at 7am.

  1. Book a $0 visit. Our trip fee and service call are always $0, and the estimate is free.
  2. Get your written quote. It lists the equipment and any duct, electrical or venting work, so you can see what the job includes.
  3. Pick your install date. Once you approve the quote, we set the install on the schedule with you.

If your system has already failed, tell us when you call. That is how we know to escalate a real emergency.

Why schedule your replacement with Veteran?

Because we tell you what your job includes before it starts and every trade is in-house. The visit costs $0.

  • Every trade on one schedule. HVAC technicians, our master electrician, Matthew Donizio, and our master plumber, Jimi Knight, work as one team, so you are not coordinating three companies.
  • Upfront, flat-rate pricing. The scope and the price are in your written quote.
  • Coverage in writing. The guarantee and the warranty terms are available before you buy.

Ready to plan your replacement? Call (720) 722-1229 or book your $0 visit for a furnace and AC replacement quote.

Ready to Get Started?

Whether you need a repair, maintenance, or a new installation, our expert team is here to help.