Skip to content
We Answer 24/7 $0 Trip Fee. Always.

What drives the cost of a furnace and AC replacement?

Tips & Advice

Founder, U.S. Army veteran

October 30, 2026
5 min read
What drives the cost of a furnace and AC replacement?

Home size, ductwork, equipment type, efficiency, your electrical panel and rebates all shape the cost of a new furnace and AC. Here is how each one works.

No one can price a furnace and AC replacement fairly without seeing the house. The biggest drivers are your home's size, the ductwork, the type and efficiency of the equipment, your electrical panel and the rebates you qualify for.

That is why we do not quote prices online. This guide walks through each cost driver so you know what a quote is built from and what to ask about. When you are ready for real numbers, our furnace and AC replacement service starts with a $0 visit and a written quote.

Why can't a fair quote be given over the phone?

Because the things that change the cost are inside your home. Square footage alone does not tell anyone how much heating and cooling you need, whether your ducts fit a new system or what your panel can carry.

A phone quote has to guess at all of that. Guesses tend to go one of two ways: a low number that grows once someone sees the job, or a padded number that covers every possibility. Neither helps you compare.

A visit replaces the guesses with facts. It looks at the equipment you have, the space it sits in, the ducts, the electrical panel and how your home actually heats and cools. Our trip fee and service call are always $0, so the visit itself costs you nothing, and the estimate is free.

Which parts of your home change the cost the most?

The size and layout of the home, the condition and design of the ductwork, where the equipment sits and whether the electrical panel can carry the new load. Each one can change the scope of the job.

Size and heating and cooling load

The right system size comes from a load calculation, a room-by-room estimate of how much heat your home gains and loses. Insulation, windows, sun exposure and ceiling height all matter. A bigger load means bigger equipment, and an undersized or oversized system costs you in comfort and wear later.

Ductwork

Your ducts carry every bit of air the new system moves. If they are sized well and in good shape, the new equipment connects to them. If they are too small, damaged or poorly laid out, some ductwork may need to be replaced so the new system can breathe. That adds to the job, but skipping it can leave you with a new system that never performs as rated.

Where the equipment sits

A furnace in an open basement is easier to reach than one in a tight attic or closet. Moving the equipment to a new spot, or working in a hard-to-reach space, changes the labor involved.

Gas, venting and drains

A new high-efficiency furnace may need different venting and a condensate drain. A change in fuel, such as switching to a heat pump, changes what has to be connected.

The electrical panel

Some homes need more electrical capacity, especially when adding a heat pump. A panel upgrade is separate electrical work, and it is often the line item people do not expect. Our master electrician can check your panel during planning.

How do efficiency and equipment type change it?

Higher-efficiency equipment costs more up front and less to run. The type of system matters too: a furnace and AC, a heat pump or a dual fuel setup each have different equipment, installation needs and rebate eligibility.

  • Efficiency ratings. SEER2 rates cooling efficiency, and AFUE rates the share of furnace fuel that becomes heat. Higher numbers usually mean higher equipment cost and lower monthly bills.
  • How the system runs. Single-stage equipment runs at full power or off. Two-stage and variable-speed equipment can run at lower output for longer, which is quieter and more even, and usually costs more.
  • System type. A furnace and AC replace two units. A heat pump does the cooling and can handle most or all of the heating as well. Dual fuel pairs a heat pump with a gas furnace for backup.
  • Matched equipment. A furnace, coil and outdoor unit chosen to work together reach their rated efficiency. Mixing new and old parts can save money now and cost efficiency later.

If you are deciding whether to replace both units or just one, our guide to replacing your furnace and AC at the same time covers that choice. If you are weighing a heat pump, read whether your existing ducts can work with a heat pump.

How do rebates and financing change what you pay?

Rebates can lower the cost of a heat pump, and financing spreads the cost over time. Neither applies the same way to every project, so the answer depends on the system you choose and your utility.

  • Heat pump rebates. Choose a qualifying heat pump and you may qualify for the Colorado heat pump tax credit, which shows up as at least $333 off your invoice for 2026, plus an Xcel Energy per-ton rebate (last verified October 1, 2026). We file the rebate paperwork.
  • Furnace and AC only. The rebate programs we file for do not list a furnace-only or AC-only replacement, so plan that project without a rebate.
  • Financing. We offer financing through Enhancify, and you can see your options with a soft credit pull that won't affect your score. Rates and terms may vary by lending partner.

Amounts depend on your utility, address, equipment and income. Our guide to how HVAC financing works explains the loan side, and the financing page has the full terms.

What should a written quote include?

The equipment by model and size, any duct, electrical, gas or venting work, removal of the old equipment, the rebates that apply and the warranty and guarantee terms in writing. A clear quote lets you compare like for like.

  • The make, model and capacity of each piece of equipment.
  • The efficiency ratings, SEER2 for cooling and AFUE for a furnace.
  • Any ductwork, electrical, gas line or venting changes, listed separately.
  • Removal and disposal of the old equipment.
  • The rebates you may qualify for, and who files them.
  • The warranty and guarantee terms, in writing.

Every new system we install is covered by the Veteran 1-Year Make-It-Right-or-Take-It-Back Guarantee. Conditions apply; the written guarantee is available before you buy. Read the guarantee.

For a look at when replacing beats repairing an older furnace, see the math on replacing a 15-year-old furnace. If a single room is the problem, our guide to mini-split installation cost covers the ductless side.

How do I get a written quote?

Book a $0 visit. We look at your home, talk through the options and give you a written quote with upfront, flat-rate pricing.

Customers often mention in reviews that our quotes held to the final price and that we did not upsell them. We will also tell you if your current system still has good years left.

Why get your replacement quote from Veteran?

Because the visit is $0, the pricing is upfront and flat-rate, and we install every option, from furnace and AC to heat pumps and dual fuel. You can compare them side by side in one visit.

  • No fee to find out. Our trip fee and service call are always $0, and the estimate is free.
  • Every trade in-house. HVAC technicians, a master electrician for the panel and a master plumber, Jimi Knight, for gas and water work.
  • Rebates handled. We install only rebate-qualifying heat pumps and file the paperwork.

Ready for a real number? Call (720) 722-1229 or book your $0 visit for a furnace and AC replacement quote.

Ready to Get Started?

Whether you need a repair, maintenance, or a new installation, our expert team is here to help.