What is an ERV, and does a newer, tighter home need one?

An energy recovery ventilator trades stale indoor air for fresh outdoor air while limiting energy loss. Learn when a tight home benefits and the upkeep.
An ERV, or energy recovery ventilator, is a fan system that sends stale indoor air out and brings fresh outdoor air in, while passing heat and moisture between the two streams so less energy is lost. Tight homes benefit most.
A home sealed tight to save energy is good for your bills, but less fresh air leaks in on its own. This guide explains what an ERV does, why a tight home can need one, how it differs from opening a window, and what upkeep it needs. We install ERVs as part of our indoor air work, and our Northern Colorado HVAC page covers the rest of the system they connect to.
What does an energy recovery ventilator do?
It ventilates the whole house on purpose. One fan pulls stale air out and another brings outdoor air in. Inside the unit, a core lets the two streams trade heat and moisture without mixing, so less energy is lost.
The U.S. Department of Energy describes energy recovery ventilation as a way to ventilate a home while minimizing energy loss through heat transfer. Here is how that plays out in each season:
- In winter: the warm air going out heats the cold air coming in, so your heating system has less work to do.
- In summer: the cooler indoor air going out takes some heat from the warm air coming in.
- Moisture: an ERV moves moisture as well as heat. A similar unit, the heat recovery ventilator or HRV, moves heat only.
The moisture part matters in a dry climate. Department of Energy guidance says that when indoor humidity is more comfortable than outdoor humidity, an ERV may be the more practical choice, because it holds on to some of the moisture you already have.
Why do tight, newer homes sometimes need one?
Airtight homes save energy, but indoor pollutants can build up when there is not enough exchange with fresh outdoor air. An ERV gives a tight home a steady, controlled supply of fresh air.
That point comes from the Department of Energy, which says whole-house mechanical ventilation is needed in energy-efficient homes, new or existing. Cooking, showers, cleaning products, furniture and people all add to indoor air. In a leaky house, some of that escapes through gaps. In a tight house, it stays longer. Our guide to air sealing and insulation before a heat pump explains how a house gets that tight in the first place.
Signs your home may need better ventilation:
- Cooking smells that hang around for hours.
- Rooms that feel stuffy, especially bedrooms overnight.
- Condensation on windows in winter.
- Bathrooms that stay damp long after a shower.
These signs can have other causes too, such as a bath fan that does not work or a humidifier set too high. That is why we look at the whole house before we recommend anything.
How is an ERV different from opening a window or running a fan?
A window lets air in with no control and no energy recovery. A bath or kitchen fan only runs now and then, near one spot. An ERV ventilates the whole house steadily and recovers much of the energy.
- Open windows: fresh air, but you lose the heat or cooling you paid for, and you cannot control how much comes in. On a smoky or windy day, you may not want outdoor air at all.
- Bath and kitchen fans: the Department of Energy notes these only run now and then to remove pollutants near where they are made. They are useful, but they do not ventilate the whole house.
- An ERV: a balanced flow in and out, running steadily or on a schedule, with energy recovered along the way.
An ERV is not an air cleaner. It changes the air; it does not scrub it. If your goal is cleaner air from your existing system, read our guide to what HVAC UV lights do to compare another add-on.
What upkeep does an ERV need?
Mostly filters and a clean core. Check and clean or replace the filters on the maker's schedule, keep the outdoor intake and exhaust hoods clear, and have the core and fans looked at during a regular HVAC visit.
- Filters: an ERV has its own filters. Dirty filters cut airflow, so check them on the maker's schedule.
- The core: follow the manufacturer's instructions for cleaning it. Some cores can be washed and some cannot.
- Outdoor hoods: keep leaves, snow and nests away from the intake and exhaust.
- Balance: the air going out and the air coming in should match. A technician can check it when the system is installed or serviced.
An ERV is an indoor air quality accessory, and it carries its own manufacturer's warranty. Filters are wear items, so plan on replacing them. On smoke days, our guide to wildfire smoke and your HVAC filters covers when to turn an ERV down.
Does every newer home need an ERV?
No. Some homes already have a ventilation system, and some are leaky enough that air exchange is not the problem. The answer depends on how tight your house is, how it feels and what ventilation it already has.
When we look at a home for an ERV, we ask simple questions first. Is there a ventilation system already? Do the bath fans work? Where does the stuffiness or condensation show up? Then we tell you plainly whether an ERV would help or whether a smaller fix comes first.
Why choose Veteran for an ERV?
We install ERVs and connect them to the HVAC system you already have. Our trip and service call are always $0, and we tell you honestly if a simpler fix will do the job.
- One company for the whole system. The same team handles the furnace, AC or heat pump the ERV works with.
- Honest advice. Customers describe plain-language explanations and no upselling.
- No fees to come out. $0 trip fee, $0 service call, nights, weekends and holidays included.
Our technicians are based in Northern Colorado. Call (970) 585-7776 for a $0 visit, or see our Northern Colorado HVAC page.
Need Help?
Contact us today to discuss your needs. Our team is ready to help.
About the Author
Founder, U.S. Army veteran
More Articles
View All PostsReady to Get Started?
Whether you need a repair, maintenance, or a new installation, our expert team is here to help.

