Hydro Jetting in Aurora, CO: What It Clears and When You Need It

What is hydro jetting, and what does it clear?
Hydro jetting sends high-pressure water through a nozzle to scrub the inside of a drain or sewer line. It clears grease, soap scum, mineral scale and small roots, and it cleans the pipe wall instead of only opening a channel.
A drain snake pokes through the middle of a clog. That restores flow for a while, but a ring of sludge often stays stuck to the pipe wall, and the clog can form again. Jetting goes after that ring.
- Grease: kitchen fats cool and harden into a coating that narrows the pipe.
- Soap scum and hair: bathroom drains build a sticky mass that snakes can pull through without removing.
- Mineral scale: hard water leaves deposits that thicken over the years.
- Small roots: thin roots that have entered a joint can be cut away and flushed out.
Jetting uses water only, with no harsh chemicals. Our plumbers handle snaking, jetting and camera inspection ourselves, so we pick the method for your line, not the one we happen to own.
Why do Aurora homes get stubborn drain and sewer clogs?
Three local conditions stack up: pipes in the many homes built in the 1970s and 1980s, Front Range clay soil that moves, and hard water that leaves mineral scale.
- Home age: Aurora's median home was built in 1985, and the largest shares date from the 1980s and 1970s. Lines from that era are old enough to have cracked joints, rough spots and root entry points.
- Clay soil: clay soils on the Front Range swell when wet and shrink when dry. That movement can shift buried pipe and open joints.
- Hard water: Aurora Water's quality report puts average hardness at 136 mg/L, or about 8 grains per gallon. Over time, hardness leaves scale on surfaces it touches.
None of that means every Aurora line has a problem. It does mean a drain that keeps clogging deserves a look inside the pipe, and the camera tells us whether the cause is grease, scale, roots or damage.
Is hydro jetting safe for older pipes?
Usually, when the pipe is in good shape and the pressure is matched to it. A camera look first shows cracks, collapsed sections or weak spots where jetting could do harm.
Pipe material changes the plan. Cast iron, clay and plastic all handle pressure differently, and a line with a break in it needs repair, not more water. We set the pressure for your pipe material and condition. If the camera shows damage, we tell you so and explain the repair options, including trenchless methods, which our guide to trenchless sewer repair walks through.
Jetting also has limits on roots. It clears small root intrusions well. A heavy mass may need cutting first, and roots return if the opening they use stays in the pipe.
Do I need hydro jetting, or will a snake do?
If a drain clogged once and stayed clear, a snake is often enough. If clogs keep returning, or several drains back up together, jetting is worth a serious look.
Signs that point toward jetting:
- A drain that stops up again within weeks of being cleared.
- Slow drains that stay slow even after snaking.
- A kitchen line with a long history of grease.
- Gurgling or a lingering smell at a drain.
Not sure? Our guide on what a slow drain can signal helps you sort a one-off clog from a deeper problem, and this post on chemical cleaners and roots explains why pouring a bottle down the drain rarely helps.
What should I do if a drain backs up at night?
Stop running water, keep clear of standing sewage, and call us. Do not pour chemical drain cleaner into a line that is completely blocked.
We answer 24/7, with no after-hours charges, ever. If it's a real emergency, we escalate to a manager right away and move our schedule to get you help. Everything else goes on the schedule starting at 7am. We never promise an arrival time, and we would rather say so than promise something we cannot hold.
Jetting is not only for emergencies, either. A recurring slow drain is the planned version of the same problem, and a calm daytime visit with a camera is the easiest way to deal with it.
Why choose Veteran for hydro jetting in Aurora?
Because a stubborn clog can need a snake, a jet or a repair, and one team does all three. We look first, name the method that fits your Aurora line, and fix the pipe if it is damaged.
Owner Mike Townsend spent eight years in the U.S. Army managing precision cooling systems for heat-seeking missile technology, and he runs every job with the same attention to detail.
- An honest recommendation: customer reviews mention honest advice and no upselling, and that matters when a snake would do the job.
- Pressure set for your pipe: older Aurora lines get a camera look first, not a blind blast.
- A master plumber on staff: Jimi Knight is a Colorado Master Plumber, so a damaged line does not mean finding a second company.
- Clear terms on drain work: drain stoppages carry a 30-day warranty from completion unless your estimate or invoice says otherwise, spelled out on our warranty page.
Read how we handle hydro jetting, see everything under plumbing services, or check our Aurora service area. Book Your $0 Visit if a drain keeps coming back.
Need Help?
Contact us today to discuss your needs. Our team is ready to help.
About the Author
Founder, U.S. Army veteran
More Articles
View All PostsReady to Get Started?
Whether you need a repair, maintenance, or a new installation, our expert team is here to help.


