Skip to content
We Answer 24/7 $0 Trip Fee. Always.

Is your sump pump about to fail? Warning signs and when to replace it

Tips & Advice

Founder, U.S. Army veteran

October 30, 2026
5 min read
Is your sump pump about to fail? Warning signs and when to replace it

Learn the warning signs of a failing sump pump, what you can safely test yourself, and how to decide between a repair and a replacement.

A sump pump is close to failing when it runs nonstop, hums without moving water, cycles on and off fast, grinds or never turns on. Test it before wet weather, and call a plumber when the signs show up.

Most homeowners only think about the sump pump when the basement is already wet. This guide explains what the pump does, which signs mean trouble, what you can check yourself and how to weigh a repair against a new pump. When you are ready for help, our sump pump repair and replacement page explains how we handle it.

What does a sump pump do?

A sump pump moves water that collects in a pit, called the sump basin, at the low point of a basement or crawl space. It pumps that water out through a pipe and away from the house.

The system has a few simple parts, and each one can fail:

  • The pit (sump basin): where ground water and drain tile water collect.
  • The pump and motor: the part that pushes water up and out.
  • The float switch: a float rises with the water and turns the pump on, then drops and turns it off.
  • The check valve: a one-way valve on the discharge pipe that stops pumped water from falling back into the pit.
  • The discharge line: the pipe that carries water outside and away from the foundation.

Water around a foundation is a real concern on the Front Range, where clay soils swell when wet. Our guide to expansive soils and slab leak risk explains why keeping water away from the house matters.

What are the warning signs of a failing sump pump?

Watch for a pump that runs all the time, hums but moves no water, turns on and off every few seconds, rattles or grinds, or stays silent while the pit fills. Rust and odors are warnings too.

  • It runs nonstop. A stuck float, a failed check valve or a pump too small for the water coming in can keep it running without a break.
  • It hums but does not pump. The motor has power, but something is blocking the impeller or the intake.
  • It short cycles. Turning on and off very fast often points to a float problem or a missing or failed check valve.
  • Strange noises. Grinding or rattling can mean worn parts or debris inside the pump.
  • It never turns on. A tripped breaker, an unplugged cord or a float trapped against the side of the pit can all stop it.
  • Rust, corrosion or a bad smell. These can mean parts are breaking down or water is sitting where it should not.
  • Damp walls or water near the pit. If water is getting past the pump, it is not keeping up.

Some of these signs come from the plumbing around the pump, not the pump itself. Our guide to signs of hidden plumbing problems covers leaks you may not see.

Repair or replace: how do you decide?

Repair makes sense when one part has failed, such as a float switch or check valve, and the pump still runs well. Replace it when the motor is failing, the pump is worn out or it cannot keep up.

A few questions help you decide:

  1. Is the problem one part or the whole pump? A stuck float or a broken check valve is a repair. A burned out motor usually is not.
  2. Has it failed before? A pump that needs help every season is telling you something.
  3. Can it keep up? If the pump runs constantly during wet weather, it may be too small for your home, and a new pump sized for the water is the real fix.
  4. What would a failure cost you? A finished basement raises the stakes. That is a good reason not to wait on a pump that is already showing signs.

We will tell you plainly which way we would go and why. Our trip and service call are always $0, so a visit to find out costs you nothing. If you want to see how we compare with other options, our guide to comparing your options walks through it.

What can I test myself?

You can safely check that the pump is plugged in, the breaker is on and the float moves freely. Then pour a bucket of water into the pit and watch the pump start, empty the pit and stop.

  1. Check the power. Make sure the cord is plugged in and the outlet or breaker has not tripped. Keep your hands dry and stay out of standing water.
  2. Look at the float. It should move up and down without catching on the pit wall or the cord.
  3. Do the bucket test. Pour water in slowly until the float rises. The pump should start, lower the water and stop on its own.
  4. Check outside. Find where the discharge line ends. Water should flow out freely, and the end should not be buried, frozen or blocked.
  5. Listen. Note any grinding, rattling or a hum with no water moving.

Stop there. Do not reach into the pit or open the pump while it has power. If the bucket test fails, or the pump hums without pumping, call a plumber.

If you are a Basic Care plan member, your yearly checks cover sump pumps, so we can look at it with the rest of your home. The plan is $9.99/month. See the Basic Care plan for what it includes.

Why call Veteran about a sump pump?

We repair and replace sump pumps, our trip fee is always $0 and Jimi Knight, our Colorado Master Plumber, is on the team when a problem needs more than a simple fix.

  • An honest repair or replace answer. Customers describe plain-language explanations and no upselling.
  • The whole system, not just the pump. The float, check valve and discharge line matter too, because a new pump will not fix a blocked line.
  • Help when water is rising. We answer 24/7, with no after-hours charges, ever. If it's a real emergency, we escalate to a manager right away and move our schedule to get you help. Everything else goes on the schedule starting at 7am.

If your pump is showing any of these signs, call (720) 722-1229 or start with our plumbing repair service. We will check the pump and tell you what it needs.

Ready to Get Started?

Whether you need a repair, maintenance, or a new installation, our expert team is here to help.